3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? polarized wiremount socket .100 .100 2 row for .100 pitch notched flat cable or discrete wire chg series physical electrical environmental insulation material: glass filled polyester (pbt) flammability: ul 94v-0 color: gray contact material: copper alloy plating : option p first wipe area: 30 ? [ 0.76 m ] gold second wipe area, underplating and u-slot: 100 ? [ 2.54 m ] nickel wire accommodation: see ordering information for options marking: 3m logo and orientation triangle current rating: 22-24 awg: 2 a; 26-28 awg: 1.5 a insulation resistance: > 1 10 9 at 500 v dc withstanding voltage: 1000 v rms at sea level temperature rating: -55 c to +105 c ts-0192-b sheet 1 of 2 ? military/din 41 612 compatibility ? two row, polarized body ? mates to 3m long latch/ eject headers and plugs ? 12 standard sizes, 10-64 positions ? twin slot idc provides four points of contact ? exclusive l/h 4-wipe contact ? 3435-0 keying plug is optional - order separately ? accepts discrete wire or notched ribbon cable ? see regulatory info rmation appendix (ria) for chemical compliance information date modified: july 1 9 , 2007 ul file no.: e68080
3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? polarized wiremount socket .100 .100 2 row for .100 pitch notched flat cable or discrete wire chg series contact quantity dimension a .006 [ 0.15 ] 10 0.680 [ 17.27 ] 14 0.880 [ 22.35 ] 16 0.980 [ 24.89 ] 20 1.180 [ 29.97 ] 24 1.380 [ 35.05 ] 26 1.480 [ 37.59 ] 30 1.680 [ 42.68 ] 34 1.880 [ 47.75 ] 40 2.180 [ 55.37 ] 50 2.680 [ 68.07 ] 60 3.180 [ 80.77 ] 64 3.380 [ 85.85 ] .0 .00 .000 inch .1 .01 .005 [ ] dimensions for reference onl y tolerance unless noted [m m ] inch notes: 1. contact wire size identification: 6 - 26 and 28 awg 2 - 22 and 24 awg 2. insulation o.d. = .054 [ 1.37 ] max 3. recommended to be mated to a .100 x .100 pin strip header with either a .235 [ 5.97 ] or a .318 [ 8.08 ] mating pin length: 929 series, 2400 series and 2300 series. 4. other sizes, polarizations and plating options are available as a special order. higher minimum quantities and lead times will apply. application tools: for discrete wire: 3586-12 pistol grip and 3624-42 assembly. for notched flat cable: 3335 press (or equivalent), 3739-chga locator plate. chg-20xx-x01010-kxx contact quantity: see table wire size options: c = 26 and 28 awg solid and stranded e = 22 awg stranded and 24 awg solid or stranded *plating options: p = gold (ria e1 and c1 apply) polarization options: j = with centerbump (standard) s = without centerbump (special order) ordering information ts-0192-b sheet 2 of 2 x x x x x x contact identification (see note 1) .600 ref [ 15.24 ] .330 ref [ 8.38 ] position 1 .078 ref [ 1.98 ] .19 [ 4.8 ] .56 [ 14.2 ] .270 [ 6.86 ] military: dual polarization slots .080 ref [ 2.03 ] .195 ref [ 4.95 ] .055 [ 1.40 ] .150 [ 3.81 ] .100 [ 2.54 ] .100 [ 2.54 ] a .100 ref [ 2.54 ] .100 ref [ 2.54 ] .120 [ 3.05 ] .234 ref [ 5.94 ] .07 [ 1.8 ] centerbump .081 ref [ 2.06 ] .06 [ 1.5 ] breakaway tab 3435 3435-0 keying plug (optional) .026 [ 0.66 ] .051 [ 1.30 ] .032 [ 0.81 ] .24 [ 6.1 ]
regulatory information appendix 3m electronic solutions division/interconnect europe appendix e1: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product is rohs compliant 2005/95/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e2: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under eu commission decision 2005/747/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e3: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment as amended by commission decision 2005/618/ec. this product contains lead in the solder tail area in excess of the maximum concentration value allowed . unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e4: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains decabde in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under eu commission decision 2005/17/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below.
china appendix c1: china rohs electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix c2: china rohs electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. the numerical reference in the symbol above should not be construed as a representation regarding the products life or an extension of a product warranty. the product warranty is stated below. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the product warranty stated below. important notice all statements, technical information, and recommendations related to 3ms products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. before using this product, you must evaluate it and determine if it is suitable for your intended application. you assume all risks and liability associated with such use. any statements related to the product which are not contained in 3ms current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized offcer of 3m. warranty; limited remedy; limited liability. this product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3m makes no other warranties including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. if this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3ms option, to replace or repair the 3m product or refund the purchase price of the 3m product. except where prohibited by law, 3m will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3m product, regardless of the legal theory asserted. please recycle. printed in usa. ? 3m 2007. all rights reserved. ria-2217-b 3 3m electronics interconnect products 6801 river place blvd. austin, tx 78726-9000 u.s.a. 1-800-225-5373 www.3m.com/interconnects 3m is a trademark of 3m company.
|
